1. 只進行單位轉換，保證實際長度一致.(When you just want to convert the Unit but keep the same length.)

　　a. Start->Program->Unigraphics V1x.0->UG Command Prompt

　　b. Cd d:ugs150(eds140)ugii

　　c. Ug_convert_part -in (-mm) name.prt

　　2. 進行單位轉換，保證數(shù)值一致，實際長度放大或縮小.(When you make a mistake unit, So you want to convert the Unit but hope keep the same parameter value. )

　　a. 啟動 UG, 打開UG part 文件，進入Modeling.

　　b. Toolbox->Expression->export 產生 name.exp 文件.

　　c. Start->Program->Unigraphics V1x.0->UG Command Prompt

　　d. Cd d:ugs150(eds140)ugii

　　e. Ug_convert_part -in (-mm) name.prt

　　f. Close UG part 文件, 重新打開 UG part 文件。進入Modeling.

　　g. Toolbox->Expression->Import with option(Replace Existing).